A groundbreaking European-made metal 3D printer has been launched to the International Space Station, marking the first time metal 3D printing will be performed in orbit. This initiative, which leverages a collaboration between ESA and Airbus, aims to demonstrate the potential of in-space manufacturing. Credit: Airbus Defence and Space SAS
Metal 3D printing will soon take place in orbit for the first time. A pioneering European-made metal 3D printer is on its way to the
The first metal 3D printer to operate aboard the International Space Station seen during ground testing, producing an ESA-design sample part. Its development led by ESA, this Metal 3D Printer aims to prove that metal 3D printing can be performed in weightless conditions, opening the way to a future in-space manufacturing capability where astronauts far from Earth can produce whatever tools or spare parts they need. Credit: Airbus Defence and Space SAS
Printing in Space
The Cygnus NG-20 spacecraft, carrying the Metal 3D Printer along with 8,200 pounds of scientific investigations and cargo, docked to the International Space Station on February 1. Once is unpacked, ESA astronaut Andreas Mogensen will prepare and install the approximately 180 kg Metal 3D printer in the European Draw Rack Mark II in ESA’s Columbus module. After installation, the printer will be controlled and monitored from Earth, so the printing can take place without Andreas’s oversight.
The Metal 3D Printer technology demonstrator has been developed by an industrial team led by Airbus Defence and Space SAS – also co-funding the project – under contract to ESA’s Directorate of Human and Robotic Exploration.
“This in-orbit demonstration is the result of close collaboration between ESA and Airbus’ small, dynamic team of engineers,” comments Patrick Crescence, project manager at Airbus. “But this is not just a step into the future; it’s a leap for innovation in space exploration. It paves the way for manufacturing more complex metallic structures in space. That is a key asset for securing exploration of Moon and 
Credit: Airbus
The printer will be printing using a type of stainless steel commonly used in medical implants and water treatment due to its good resistance to corrosion.
The stainless-steel wire is fed into the printing area, which is heated by a high-power laser, about a million times time more powerful than your average laser pointer. As the wire dips into the melt pool, the end of the wire melts, and metal is then added to the print.
ESA materials engineer Advenit Makaya from the ESA’s Directorate of Technology, Engineering and Quality, provided technical support to the project: “The melt pool of the print process is very small, in the order of a millimeter across, so that the liquid metal’s surface tension holds it securely in place in weightlessness. Even so, the melting point of stainless steel is about 1400 °C so the printer operates within a fully sealed box, preventing excess heat or fumes from reaching the crew of the Space Station. And before the print process begins the printer’s internal oxygen atmosphere has to be vented to space, replaced by nitrogen – the hot stainless steel would oxidize if it became exposed to the oxygen.”
The Metal 3D printer will be the first time a 3D printer will print in metal on the International Space Station. ESA contracted Airbus Defense and Space SAS to produce the 3D printer and it will feature a stainless-steel wire that will be melted using a high powered laser and print four prints, each taking two to four weeks to finish printing.It was launched on NG-20 on January 30, 2024. Credit: Airbus Defence and Space SAS
Shapes and Sizes
Four interesting shapes have been chosen to test the performance of the Metal 3D printer. These first objects will be compared to the same shapes printed on ground, called reference prints, to see how the space environment affects the printing process. The four prints are all smaller than a soda can in size, weigh less than 250 g per print, and takes about two to four weeks to print. The scheduled print time is limited to four hours daily, due to noise regulations on the Space Station – the printer’s fans and motor of the printer are relatively noisy.
Once a shape has been printed, Andreas will remove it from the printer and pack it for safe travels back to Earth for processing and analysis, to understand the differences in printing quality and performance in space, as opposed to Earth.
One reference and 0xg print, which is a part of a dedicated tool, will go to the European Astronaut Centre (EAC) in Cologne, Germany. Another two will be headed to the technical heart of ESA, the European Space Research and Technology Centre (ESTEC), where a team at the Materials and Electrical Components Laboratory awaits the samples for macro and micro analysis of the printed parts. The final print will go to the Technical University of Denmark (DTU), who proposed its shape, and will investigate its thermal properties in support of e.g. future antenna alignment.
Preparing for the Future
“As a technology demonstration project, our aim is to prove the potential of metal 3D printing in space,” adds Rob. “We’ve already learned a lot getting to this point and hope to learn a lot more, on the way to making in-space manufacturing and assembly a practical proposition.”
One of ESA’s goals for future development is to create a circular space economy and recycle materials in orbit to allow for a better use of resources. One way would be to repurpose bits from old satellites into new tools or structures. The 3D printer would eliminate the need to send a tool up with a rocket and allow the astronauts to print the needed parts in orbit.
Tommaso Ghidini, Head of the Mechanical Department at ESA, notes: “Metal 3D in space printing is a promising capability to support future exploration activities, but also beyond, to contribute to more sustainable space activities, through in-situ manufacturing, repair and perhaps recycling of space structures, for a wide range of applications. This includes in-orbit large infrastructure manufacturing and assembly as well as planetary long-term human settlement. These aspects are key focuses in ESA’s upcoming technology cross-cutting initiatives.”
Thomas Rohr, overseeing ESA’s Materials and Processes Section, adds: “This technology demonstration, showcasing the processing of metallic materials in microgravity, paves the way for future endeavors to manufacture infrastructure beyond the confines of Earth.”