A battery-free, wireless underwater camera developed at MIT could have many uses, including climate modeling. “We are missing data from over 95 percent of the ocean. This technology could help us build more accurate climate models and better understand how climate change impacts the underwater world,” says Associate Professor Fadel Adib. Credit: Adam Glanzman
New underwater camera could help scientists explore unknown regions of the ocean, track pollution, or monitor the effects of climate change.
More than 95 percent of Earth’s oceans have never been observed, according to estimates by scientists, which means we have seen less of our planet’s ocean than we have the far side of the moon or the surface of
One steep challenge preventing widespread undersea exploration is the high cost of powering an underwater camera for a long time. Doing so now requires tethering it to a research vessel or frequently sending a ship to recharge its batteries.
Fadel Adib (left) associate professor in the Department of Electrical Engineering and Computer Science and director of the Signal Kinetics group in the MIT Media Lab, and Research Assistant Waleed Akbar display the battery-free wireless underwater camera that their group developed. Credit: Adam Glanzman
Because it doesn’t require a power source, the camera could run for weeks on end before retrieval This would enable scientists to search remote parts of the ocean for new species. It could also be used to capture images of ocean pollution or monitor the health and growth of fish raised in aquaculture farms.
“One of the most exciting applications of this camera for me personally is in the context of climate monitoring. We are building climate models, but we are missing data from over 95 percent of the ocean. This technology could help us build more accurate climate models and better understand how climate change impacts the underwater world,” says Fadel Adib, senior author of a new paper on the system. He is an associate professor in the Department of Electrical Engineering and Computer Science and director of the Signal Kinetics group in the MIT Media Lab.
Joining Adib on the paper are co-lead authors and Signal Kinetics group research assistants Sayed Saad Afzal, Waleed Akbar, and Osvy Rodriguez, as well as research scientist Unsoo Ha, and former group researchers Mario Doumet and Reza Ghaffarivardavagh. The paper is published today (September 26, 2022) in the journal
Going battery-free
To build a camera that could operate autonomously for long periods, the scientists needed a device that could harvest energy underwater on its own while consuming very little power.
Transducers made from piezoelectric materials are placed around the camera’s exterior and are used to acquire energy. Piezoelectric materials produce an electric signal when a mechanical force is applied to them. When a sound wave traveling through the water hits the transducers, they vibrate and that mechanical energy is converted into electrical energy.
Those sound waves could come from any source, like a passing ship or marine life. The camera stores harvested energy until it has built up enough to power the electronics that take photos and communicate data.
To keep power consumption as low as possible, the engineers used off-the-shelf, ultra-low-power imaging sensors. However, these sensors only capture grayscale images. And since most underwater environments lack a light source, they needed to develop a low-power flash, too.
“We were trying to minimize the hardware as much as possible, and that creates new constraints on how to build the system, send information, and perform image reconstruction. It took a fair amount of creativity to figure out how to do this,” Adib says.
They solved both problems simultaneously using red, green, and blue LEDs. When the camera captures an image, it shines a red LED and then uses image sensors to take the photo. It repeats the same process with green and blue LEDs.
Even though the image looks black and white, the red, green, and blue colored light is reflected in the white part of each photo, Akbar explains. When the image data are combined in post-processing, the color image can be reconstructed from the three source images.
“When we were kids in art class, we were taught that we could make all colors using three basic colors. The same rules follow for color images we see on our computers. We just need red, green, and blue — these three channels — to construct color images,” he says.
Sending data with sound
Once image data are captured, they are encoded as bits (1s and 0s) and sent to a receiver one bit at a time using a process called underwater backscatter. The receiver transmits sound waves through the water to the camera, which acts as a mirror to reflect those waves. The camera either reflects a wave back to the receiver or changes its mirror to an absorber so that it does not reflect back.
A hydrophone next to the transmitter senses if a signal is reflected back from the camera. If it receives a signal, that is a bit-1, and if there is no signal, that is a bit-0. The system uses this binary information to reconstruct and post-process the image.
“This whole process, since it just requires a single switch to convert the device from a non-reflective state to a reflective state, consumes five orders of magnitude less power than typical underwater communications systems,” Afzal says.
The camera was tested in several underwater environments by the researchers. In one, they captured color images of plastic bottles floating in a New Hampshire pond. They were also able to take such high-quality photos of an African starfish that tiny tubercles along its arms were clearly visible. The device was also effective at repeatedly imaging the underwater plant Aponogeton ulvaceus over the course of a week in a dark environment to monitor its growth.
Now that they have demonstrated a working prototype, the engineers plan to enhance the device so it is practical for deployment in real-world settings. They want to increase the camera’s memory so it could capture photos in real-time, stream images, or even shoot underwater video.
Another goal is to extend the camera’s range. They successfully transmitted data 40 meters (130 feet) from the receiver, but pushing that range wider would enable the camera to be used in more underwater settings.
“This will open up great opportunities for research both in low-power IoT devices as well as underwater monitoring and research,” says Haitham Al-Hassanieh. Heis an assistant professor of electrical and computer engineering at the University of Illinois Urbana-Champaign, who was not involved with this research.
Reference: “Battery-free wireless imaging of underwater environments” by Sayed Saad Afzal, Waleed Akbar, Osvy Rodriguez, Mario Doumet, Unsoo Ha, Reza Ghaffarivardavagh and Fadel Adib, 26 September 2022, Nature Communications.DOI: 10.1038/s41467-022-33223-x
This research is supported, in part, by the Office of Naval Research, the Sloan Research Fellowship, the National Science Foundation, the MIT Media Lab, and the Doherty Chair in Ocean Utilization.
Source: SciTechDaily